Tt Divider 370 钢化玻璃 Mid-Tower ARGBE-ATX机箱- 雪白

Thermaltake Divider 370 Tempered Glass Mid-Tower ARGB E-ATX Case - Snow - Drive Bays: 2x 3.5inch or 2.5inch, 2x 2.5inch - Expansion Slots: 7 - Fans Included: 2x 120mm ARGB PWM Front, 1x 120mm ARGB PWM Rear - Front I/O: 2x USB-A 3.0, 1x HD Audio - Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX - Material: SPCC - PSU Support: Standard PS2 PSU - CPU Clearance: 170mm - GPU Clearance: 340mm (with radiator), 400mm (without radiator) - CA-1S4-00M6WN-00

Manufacturer Warranty: 3 Years

Manufacturer Contact Info: http://www.Thermaltake.com/, 03 9763 1622

Thermaltake Divider 370 TG Snow ARGB Mid Tower Chassis

The Divider 370 TG Snow ARGB is an ATX mid-tower case that comes with three preinstalled 120mm ARGB PWM fans, one tempered glass window on the left side, and can support up to a 360 mm radiator at the front and top.
 

Divider 370 TG Snow ARGB Mid Tower Chassis

Thermaltake designed a brand-new case series that contains stylish side panels and powerful airflow performance blending all the functionality into the Divider Series.

Modern design with Divider 370 TG Snow ARGB's left panel gives the chassis a unique look while offering a great interior view. With three pre-installed ARGB PWM fans, you can enhance the cooling performance with exceptional customizable lighting. The Divider 370 TG Snow ARGB Mid Tower Chassis is the next-gen gaming PC case for regular users, enthusiasts, and gamers, giving them unprecedented satisfaction.

Unique Side Panels Design with a Tempered Glass Window

The exceptional feature of the Divider 370 TG Snow ARGB is the unique panel comprising a steel panel and a 3mm tempered glass window on the left side. The side panel is visually divided to create a unique look and is tool-free and easy to remove. The tempered glass window is thicker and more scratch-resistant compared to standard acrylic.

Mesh Front Panel

The Divider 370 TG Snow ARGB comes with a large airflow-optimized stylish mesh panel at the front, offering a unique divided design and additional air intake through the mesh.

Three Preinstalled ARGB PWM Fans

The Divider 370 TG Snow ARGB comes with three pre-installed hydraulic bearing 120mm ARGB PWM fans, effectively lowering the operation noise and enhancing thermal efficiency. The fans' lighting effect can be controlled by the physical RGB button on the I/O panel or motherboard software from ASUS, GIGABYTE, MSI, and ASRock. There are 27 RGB lighting modes to play around with when using the physical RGB button, and it's simple to switch between physical button control and motherboard software control by long pressing the RGB button for three seconds.

PSU Cover & Pre-Installed Vertical GPU Holder

The built-in PSU cover is designed to hide unsightly cables with good ventilation. The pre-installed GPU holder enables vertical GPU installation but also helps reduce the weight on the PCI-E slots.

Excellent Dust Filtration

The Divider 370 TG Snow ARGB has a well-designed removable magnetic fan filter on the top and the inner right side. At the base, the removable filter provides excellent dust protection and dirt reduction, ensuring a dust-free environment.

Air Intake and Exhaust

The cooling performance of the Divider 370 TG Snow ARGB is excellent. The large airflow-optimized mesh panel at the front allow optimal air intake. Cooling exhausts are located at the rear of the case. Depending on the user's overall PC layout design, on the top and right side are venting mechanisms for air intake or exhaust.

Excellent Hardware Support & Cooling Solution

The Divider 370 TG Snow ARGB has excellent hardware support. It can support a CPU cooler with a maximum height of 170mm, VGA with a maximum length of 400mm (without radiator), a power supply with a length of up to 230mm (with HDD Cage), two 3.5inch HDDs with two 2.5inch SSDs or a total of four 2.5inch SSDs. When it comes to cooling, the Divider 370 TG Snow ARGB comes preinstalled with three hydraulic bearing 120mm ARGB PWM fans, which can effectively lower the operation noise and enhance the thermal efficiency, you can also choose to put three 140mm fans at the front and one 120mm fan at the rear. Moreover, it can hold up to three 120mm fans at the top and two 120mm fans on the right of the motherboard side. It can support up to 360mm at the front and top for radiator compatibility.

Dimensions:

CPU Cooler

Max height 170mm

Motherboard

E-ATX(12” x 13”), ATX, Micro ATX, Mini ITX

PSU

Max length: 230mm (with HDD Cage)

Video Card

Length limitation: 340mm (with radiator), 400mm (without radiator)

Storage:

HDD

2x 3.5inch or 2x 2.5

SSD

2x 2.5inch or up to 4x 2.5inch (using the 3.5inch bays as well)

Fan Capacity:

120mm

140mm

Radiator Capacity:

120mm

140mm

240mm

280mm

360mm

Handy I/O Ports

Two USB 3.0 and one HD Audio jack is placed on the top panel to grant direct access when needed.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the above software without installing any extra lighting software or controllers. Please visit ASUS, GIGABYTE, MSI, and ASRock official websites for more details.

Footnote:

All images are for reference only.